| Now before you run out and buy a trailer, you really | | | | unloading the goods. Make sure that the axle is placed |
| should consider building one yourself. It really is not as | | | | at the center along with the frame. This is the most |
| hard as it sounds and you also will be able to build a | | | | critical part of building a trailer that you should never |
| perfect trailer to suit your exact needs instead of just | | | | ignore. You have to make sure that it is at the center |
| buying one that comes close to being what will suit | | | | part of the trail. |
| your needs. | | | | For you to make sure that your tracking is straight, |
| Always have a plan with a project like this. With a | | | | make sure that the distance of the wheel and the hitch |
| clear plan and goal this project will be a snap and you | | | | is equal. Remember that the axle must be square and |
| will have a great trailer that will be perfect as well as | | | | should be placed at the center of the frame. Next, |
| functional. | | | | when the frame is positioned upside down, you can |
| In building a trailer, you need to have an axle kit. You | | | | mount the tongue crossing a bar; this should be |
| also need to consider the weight capacity, the frame, | | | | positioned ahead of the axle. You will also notice a |
| the height and the suspension. All these depend on the | | | | solid and round bar which is somewhat a square tube |
| type of trailer that you will build. | | | | forming the tongue. |
| The first step in building a trailer begins with the main | | | | You will also notice 2 mounting tabs having half inch |
| frame. The pieces of the main frame should be cut | | | | holes. This will do the pivot action of the trailer. Next |
| down and welded. You need to use a good saw and | | | | step, you have to attach the latch to prevent tilting of |
| a good welded to accomplish this task. You have to | | | | the trailer. You should secure it so that it won't fall. You |
| make sure the flatness and the square shape of the | | | | can use some small rods to serve as the fenders; the |
| frame. Next is that you need to position the axle | | | | use of low heat can help weld the rods to the system. |
| depending on the type of trailer you are building. If you | | | | An angle iron can also be used to secure the fenders |
| are to make a tilting trailer, then the axle must be | | | | and also it can serve as mounting points. Lastly, you |
| positioned towards gravity. | | | | need to make the back portion of the trailer. You can |
| The third step is to calculate the tongue weight. It is | | | | do this using the angle iron welded together. When you |
| advisable to use 5% of the weight of the trailer to be | | | | are done, remove all the rust on the surface and start |
| your tongue weight. This is enough to trail after | | | | painting the trailer. |